Safety Control Systems
BS EN 13128
LOW VOLTAGE BOX – ‘BT’ MODEL
All three models in both the standard latching e-stop and key lock latching e-stop ranges feature stop and start membrane push button switches. The boxes are 170mm long x 118mm wide and up to 82mm deep.
All models are CE marked and comply with the Low Voltage Directive 2006/95/EC, the Machinery Directive 2006/42/EC and Electromagnetic Compatibility 2004/108/EC.
EMERGENCY E-STOP ROPE – ‘MIC007’ MODEL
The Repar2 14MIC007 rope pull e-stop is a re-setting emergency stop supplied with 4000mm of pull rope. This safety device is ideal for use on large lathes when the headstock-mounted e-stop could potentially be out of reach or there is no saddle-mounted e-stop.
The machine can be brought to a stop from any point along the bed of the lathe with a pull of the red rope. The safety switch will keep the contacts open after rope pull activation (even if the rope is released), until the reset button is set at the switch.
