Boring Machines
BS EN ISO 13128
The basics:
- fixed and interlocked moveable cutter guard or fixed and interlocked moveable table guard
- feed and lead screws to be covered where appropriate
- emergency stop
- gear drive cover (fixed or interlocked)
HORIZONTAL BORER GUARD – ‘AL’ MODEL
The steel-framed guard with its impact-resistant polycarbonate window lifts vertically on a hardened linear guide rail and is fully counterbalanced, thus avoiding any manual handling issues.
There are three models available as standard, each with different size screens and column heights to suit. Each model is supplied with left or right-hand fitting which is determined by the part number specified.
HORIZONTAL BORER GUARD – ‘TP’ MODEL
Steel safety guards for lathes with large to medium-sized chucks. The guards have two hinged sections and are complete with two micro switches. The first hinged section is at the front and is ideal for inspection and re-positioning of the work piece when the chuck is not rotating.
The second hinged section is at the rear and allows the whole guard to be tilted back away from the chuck. This guard also provides coverage of the rear of the chuck, giving greater protection from ejection hazards and helping to contain coolant.
VERTICAL BORER GUARD – ‘TGS’ MODEL
Repar2 TGS guards are made specifically for vertical turning lathes and vertical boring machines and are the best option available.
Custom manufactured to your specifications.
